Dexter SST White Microfiber Slide Sole (S8)
The S8 white microfiber interchangeable slide sole is the standard slide for performance shoes and is recommended for normal to tacky approaches for the stroker who needs a longer slide.
CUT TO FIT - Not compatible with Dexter THE 9 shoes
- Cut to fit sizes: Mens 7-10.5 & Womens 5-11
- Sole s8
- Longer Slide
- White Microfiber
- Compatible with all Dexter SST 5, 6, 7, & 8 shoes
- For Dexter SST Series Shoes Only
- Approach: Recommended for normal to sticky approaches
- Profile: For the "stroker" who needs a longer slide.
- SKU: pd414
- Product ID: 160
- Brand: Dexter
- Category: Bowling Shoes
Customer Reviews | 30 Customer Questions
By Tbowler from Indiana
Pros:
Made shoes like new.
Cons:
None
Bottom Line:
Yes, I would recommend this to a friend
Great Replacement
Replaced the sole I use most on the approach, will buy again in the future.
By sam from sarasota ,fl.
Pros:
yes
Bottom Line:
Yes, I would recommend this to a friend
I like this slide sole too !!!!!
good as pro. shops.
By Rick the quick from Washington
Bottom Line:
Yes, I would recommend this to a friend
best sole in bowling
Perfect for all conditions and any bowling lanes you go to.
Customer Questions & Answers | Reviews
Question:
is this sole fit for left and right shoe
Have an answer to this question?
Question:
does this go on inside of shoe?
Have an answer to this question?
Question:
Will it fit any make of bowling shoe?
Have an answer to this question?
Question:
does it perfectly fit for Dexter Mens SST 6 LZ Right Hand Wide Width size 9 ? or should i have to cut it after putting it on?
Have an answer to this question?
Question:
Does it fit any dexter shoe I got Ricky iv
Have an answer to this question?
Question:
Do you have any thing that would work on the Ricky IV shoe
Have an answer to this question?
Question:
How is it applied to the shoe?
Have an answer to this question?
Question:
Does it slide more or less
Have an answer to this question?
Question:
do they no longer make the s6 sole and heel set?
Have an answer to this question?
Question:
will it fit the Pro Am II
Have an answer to this question?
Question:
will it fit the Pro Am II
Have an answer to this question?
Question:
Will this product fit mens strike 300 etoic
Have an answer to this question?
Answer:
This sole is only intended to work with Dexter shoes or Storm shoes so I cannot confirm how well it would work with Etonic. I am sorry for any inconvenience.
7 of 7 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
How do you put it on?
Have an answer to this question?
Question:
Will this fit the Dexter Pro Boa shoes? I wear a 14 wide...
Have an answer to this question?
Answer:
If you wear a size 14 wide you would need to get this oversized sole here: https://www.bowling.com/products/dexter-white-microfiber-oversized-slide-sole--s8-.htm
7 of 7 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
What heel sole goes with the s8 slide sole
Have an answer to this question?
Answer:
The most common heel that comes with most shoes would be an H5 heel. However, if you need more slide you may want to pair the S8 with an H7 heel and if you need more brake then you could try a H2. I hope this helps.
7 of 7 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
how do you put the slider on your shoe
Have an answer to this question?
Question:
Is this available for Men's size 12?
Have an answer to this question?
Answer:
The "Oversized" version of this slide sole is sized for a Men's size 12 shoes. https://www.bowling.com/products/dexter-white-microfiber-oversized-slide-sole--s8-.htm
7 of 7 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
Can I get away with this for a size 11 even though it says to 10.5? The oversized is out of stock.
Have an answer to this question?
Answer:
If you get the standard size which fits up to a size 10.5 then you could still use it. When you trim the sole and fit it to your shoe you want to make sure the front edge is covered and if you leave any velcro exposed you can leave some exposed toward the middle of the shoe.
7 of 7 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
Can these soles be attached to regular shoes?
Have an answer to this question?
Question:
I have new women Dexter. Will this work Slide foot S8 and H5 ,T5 and H5 on traction foot
Have an answer to this question?
Answer:
Yes, this sole will fit Dexter SST style shoes that have interchangeable sole and this exact sole would fit Womens size 5-11. This would not work on the Dexter THE 9 shoes.
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
what's the difference between the 8 & 10 white slider
Have an answer to this question?
Question:
Do you make a #9 slide for the dexter SST 8
Have an answer to this question?
Answer:
Here is a link to the Dexter SST S9 sole: https://www.bowling.com/products/dexter-sst-saw-tooth-s9-slide-sole.htm
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
I have a size 15 shoe will this work for it? Cause the comments say 7 to 10.5
Have an answer to this question?
Question:
so is this the long slide comparible to the vs 8 longest slide on my sst IV?
Have an answer to this question?
Question:
what holds it to bottom
Have an answer to this question?